top of page




FF-Mini Dragon RC Model Designed by: Frank Petty
This an original RC model that features a forward swept main wing and canards. The original RC model design was made with Readiboard brand Foamboard and covered with colored sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model, but may require carbon spars.



  • Wing Span: 24 Inches (60.96cm)

  • Length: 28.23 Inches (71.70cm)
    AUW: 16.0 Ounces (435.6gm) (As Built with Foamboard, Depron or Fan Fold may result in a lighter model)

  • Servos: 2ea 9gm (HXT-900 Recommended)

  • Motor: 2212-6 2200kv Brushless Outrunner Motor

  • Battery: 1350mah 3S 40C Lipo or Better

  • Speed: 60mph to 70+mph (96kph to 112kph) depending on motor used

  • Required Radio: Minimum 4-Channel with Delta mixing (Recommended 2.4ghz)

  • Flight Skill Required: Beginner to Advanced

  • Building Skill Required: Beginner

FF-MiniDragon PDF Plan - Cost $6.00
(PDF Plan Includes Tiled and Non-Tiled Plans)
bottom of page