top of page




FF-28 RC Model Designed by: Frank Petty
This RC model is an original design with some hints of an F-117 Stealth type design. The original RC model design was made with Elmer's Black Foamboard and covered with clear sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model.



  • Wing Span: 27.5 Inches (69.85cm)

  • Length: 30 Inches (76.2cm)

  • AUW: 26 Ounces (737.1gm) (As Built with Foamboard, Depron or Fan Fold will result in much lighter model)

  • Servos: 2 Micro (Metal Gear Recommended)

  • Motor: 2212/6 for Basic Setup (Grayson Hobbies Super Mega Jet for Performance Setup)

  • Speed: 50mph to 70+mph (80.5kph to 112kph) depending on motor used

  • Required Radio: Minimum 4-Channel (Recommended 6 channel 2.4ghz)

  • Flight Skill Required: Beginner to Intermediate

  • Building Skill Required: Beginner to Intermediate

Free PDF Plan Below:

bottom of page