top of page


FF-35 460.jpg


FF-35 RC Model Designed by: Paul Petty
This RC model is loosely based on the F-35 Joint Strike Fighter Fighter used by the USAF. The original RC model design was made with Readiboard brand Foamboard and covered with colored sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model, but may require carbon spars.



  • Wing Span: 24 Inches (60.96cm)

  • Length: 28.83 Inches (73.23cm)

  • AUW: 23.0 Ounces (652gm) (As Built with Foamboard, Depron or Fan Fold will result in much lighter model)

  • Servos: 2 Micro (Metal Gear Recommended)

  • Motor: Turnigy 2836-2350 Motor or Grayson Hobbies Super Mega Jet

  • Speed: 60mph to 70+mph (96kph to 112kph) depending on motor used

  • Required Radio: Minimum 4-Channel with Delta mixing (Recommended 2.4ghz)

  • Flight Skill Required: Intermediate

  • Building Skill Required: Intermediate

Free PDF Plan Below:

bottom of page