top of page

FF-23V2

pic5.jpg

DESCRIPTION:
FF-23 RC Model Designed by: Paul Petty
This is the version 2 RC model plane inspired by the YF-23 that competed to be Americas new Advanced Tactical Fighter.  The original RC model was made with Readiboard brand Foamboard and painted with Testor's Brand Flat Black Model Paint. Parts of the bottom of the model were covered with clear packing tape for increase durability and protection. Other materials such as Depron and Fan Fold Foam may be used to make this model, but may require carbon spars.

 

BASIC RC MODEL NOTES:

  • Wing Span: 28.0 Inches (71.12cm)

  • Length: 42.20 Inches (107.2cm)

  • AUW: 27.0 Ounces (840gm) (As Built with Foamboard, Depron or Fan Fold may result in a lighter model)

  • Servos: 3ea Micro Metal Gear Recommended

  • Motor: Grayson Hobby Super Mega Jet or Monster Jet Brushless Outrunner Motors

  • Speed: 85+mph (137kph) depending on motor used

  • Required Radio: Minimum 4-Channel (Recommended 2.4ghz)

  • Flight Skill Required: Intermediate to Advanced

  • Building Skill Required: Intermediate

FF-23V2 PDF Plan - Cost $6.00
(PDF Plan Includes Tiled and Non-Tiled Plans)
FF-23V2 50percent.jpg
FF-23V2 Plans_Page_03.jpg
bottom of page