top of page

FF-Bullet Plane



FF-Bullet Plane RC Model Designed by: Frank Petty
This an original RC model that features a Delta main wing with a KFm2 airfoil and sleek looks. The original RC model design was made with Readiboard brand Foamboard and covered with colored sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model, but may require carbon spars.



  • Wing Span: 24 Inches (60.96cm)

  • Length: 28.69 Inches (72.87cm)

  • AUW: 16.0 Ounces (435.6gm) (As Built with Foamboard, Depron or Fan Fold may result in a lighter model)

  • Servos: 2ea Micro metal gear

  • Motor: Basic Setup 2212-6 2200kv or Performance Setup Turnigy 2836-2350 Brushless Outrunner Motor

  • Speed: 80mph to 100+mph (128kph to 160kph) depending on motor used

  • Required Radio: Minimum 4-Channel with Delta mixing (Recommended 2.4ghz)

  • Flight Skill Required: Intermediate to Advanced

  • Building Skill Required: Beginner

FF-Bullet Plane PDF Plan - Cost $6.00
(PDF Plan Includes Tiled and Non-Tiled Plans)
bottom of page