FF-15 RC Model Designed by: Paul Petty
This RC model is loosely based on the USAF F-15 Eagle. The original RC model design was made with Elmer's Foamboard and covered with colored sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model.



  • Wing Span: 24 Inches (60.96cm)

  • Length: 29 Inches (73.66cm)

  • AUW: 21 Ounces (595.35.1gm) (As Built with Foamboard, Depron or Fan Fold will result in much lighter model)

  • Servos: 3 Micro (Metal Gear Recommended)

  • Motor: 2212/6 for Basic Setup (Grayson Hobbies Super Mega Jet for Performance Setup)

  • Speed: 60mph to 80+mph (96kph to128kph) depending on motor used

  • Required Radio: Minimum 4-Channel (Recommended 2.4ghz)

  • Flight Skill Required: Intermediate to Advanced

  • Building Skill Required: Beginner to Intermediate

Free PDF Plan Below:

© 2020 by Paul Petty. Created with Wix.com