DESCRIPTION:
FF-117 RC Model Designed by: Paul Petty
This RC model is loosely based on the F-117A Stealth Fighter used by the USAF. The original RC model design was made with Elmer's Foamboard and covered with colored sealing/packing tape. Other materials such as Dollar Store Foamboard, Depron Foam and Fan Fold Foam may be used to make this model.

 

BASIC RC MODEL NOTES:

• Wing Span: 26 Inches (66.04cm)

• Length: 34.5 Inches (87.63cm)

• AUW: 28 Ounces (793.8gm) (As Built with Elmer's Foamboard, Depron or Fan Fold will result in much lighter model)

• Servos: 2 Micro (Metal Gear Recommended)

• Motor: Grayson Hobbies Super Mega Jet (Turnigy 2836-2350 Motor)

• Speed: 50mph to 70+mph (80.5kph to 112kph) depending on motor used

• Required Radio: Minimum 4-Channel (Recommended 6 channel 2.4ghz)

• Flight Skill Required: Intermediate to Advanced

• Building Skill Required: Beginner to Intermediate 

​

Free PDF Plan Below: