top of page

FF-BOP (Bird Of Prey)



FF-BOP (Bird Of Prey) RC Model Designed by: Paul Petty
This an original RC model was loosely inspired by the Boeing Bird of Prey. The original RC model was made with Readiboard brand Foamboard and painted with Testor's Brand Primer Gray Model Paint. The bottom of the model was covered with clear packing tape for protection. Other materials such as Depron and Fan Fold Foam may be used to make this model, but may require carbon spars.



  • Wing Span: 21.64 Inches (54.97cm)

  • Length: 35.32 Inches (89.71cm)

  • AUW: 21.0 Ounces (595gm) (As Built with Foamboard, Depron or Fan Fold may result in a lighter model)

  • Servos: 2ea Micro Metal Gear Recommended

  • Motor: 2212-6 2200kv Brushless Outrunner Motor

  • Battery: 1800mah to 2200mah 3S 30C Lipo or Better

  • Speed: 60mph to 70+mph (96kph to 112kph) depending on motor used

  • Required Radio: Minimum 4-Channel with Delta mixing (Recommended 2.4ghz)

  • Flight Skill Required: Intermediate to Advanced

  • Building Skill Required: Intermediate

FF-BOP PDF Plan - Cost $6.00
(PDF Plan Includes Tiled and Non-Tiled Plans)
bottom of page