I am thinking about making a version of the FF-117V2 with a 70mm or 50mm EDF... Has anyone else made an EDF FF-117V2 on their own yet? If so, how did it work out for you?
I tested fly the 50mm and 64mm FF-117 RC planes after I made some Cheater Hole Air Intake modifications. A Cheater Hole is another Air Inlet other than the scale sized air intakes. The 50mm version did fly OK without the Cheater Mod, but I wanted to try it anyway. The 64mm plane did seem to struggle to get enough air to the EDF in the previous test flight. So on the 64mm plane I added top and bottom Cheater holes to see if it would fly better. One other note, I noticed the 64mm EDF was way down on power from the manufacturer's spec's. So I may try and swap it out later.
I tested fly the 50mm and 64mm FF-117 RC planes after I made some Cheater Hole Air Intake modifications. A Cheater Hole is another Air Inlet other than the scale sized air intakes. The 50mm version did fly OK without the Cheater Mod, but I wanted to try it anyway. The 64mm plane did seem to struggle to get enough air to the EDF in the previous test flight. So on the 64mm plane I added top and bottom Cheater holes to see if it would fly better. One other note, I noticed the 64mm EDF was way down on power from the manufacturer's spec's. So I may try and swap it out later.